Podrobné informace
 |
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
2. Up to 512GB ECC DDR3, up to
1866MHz; 8x DIMM slots
3. 3x PCI-E 3.0 (x8) slots via riser card
(1x Low-profile and 2x Full-height
Full-length)
4. Intel® i350 Dual port Gigabit Ethernet
5. 12x Hot-swap 2.5" SAS HDD Bays
6. Onboard Mellanox ConnectX FDR
InfiniBand Controller, QSFP interface
7. 1280W Redundant Digital PS
Platinum Level (95%)
|
|
| |
 |
|
|
|
|
|
 |
| SYS-2027TR-D70FRF |
- SuperServer 2027TR-D70FRF (Black)
|
| |
|
Super X9DRT-HIBFF |
| |
|
| CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP *)
* Please contact your Supermicro sales representative for additional details |
| Note |
† BIOS version 3.0 or above is required |
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 8x 240-pin DDR3 DIMM slots
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC Registered memory (RDIMM)
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| Infiniband |
- Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller
|
| SAS |
- LSI 2008 SAS (6Gbps)
- IT mode only
- Note: In order to support the Broadcom RAID Controllers, both CPU socket must be populated
|
| SATA |
- SATA 2.0 & 3.0 with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| SAS |
- 12x SAS ports (6Gbps)
- IT mode SAS option
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 3x USB 2.0 ports total
(2x rear + 1x Type A)
|
| VGA |
|
| Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header
|
| Infiniband |
- 1 external QSFP Infiniband connector
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
|
| PCI-Express |
- 3x PCI-E 3.0 (x8) slots via riser card
(1x Low-profile, 2x Full-height, Full-length slots)
|
| |
|
| Hot-swap |
- 12x Hot-swap 2.5" HDD trays
|
| |
|
| Fans |
|
| |
|
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input |
- 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
| Certification |
 
Platinum Certified
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
