 |
 |
| SYS-2027R-72RFTP+ |
- SuperServer 2027R-72RFTP+ (Black)
|
| |
|
Super X9DRW-7TPF+ |
| |
|
| CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
|
| Note |
† BIOS version 3.0 or above is required |
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC Registered memory (RDIMM)
- Up to 192GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SAS |
- SAS2 from LSI 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
- Supports up to 16 drives
|
| SATA |
- Via Cable for SATA controller
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® 82599 Dual Port 10G SFP+
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| SAS |
|
| LAN |
- 2x SFP+ 10GbE LAN ports
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 5x USB 2.0 ports total
(2x rear + 2x via header + 1x Type A)
|
| VGA |
|
| Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
|
| PCI-Express |
- Left: 1 PCI-E 3.0 (x16), 2 PCI-E 3.0 (x8) Full-height
- Right: 2 PCI-E 3.0 (x8) Low-profile
- Please refer here for AOC Support details
- UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| |
|
| Hot-swap |
- 16x Hot-swap 2.5" SAS / SATA HDD trays (optional Storage controller card*)
|
| |
|
| DVD-ROM |
- Slim DVD-ROM drive (optional)
|
| |
|
| 1x SAS2 / SATA backplane |
| |
|
| Fans |
- 4x 8cm heavy duty PWM fans
|
| |
|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
| Certification |
  Platinum Certified
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
