| |
 |
Super X9DRW-iTPF |
| |
|
| CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP *)
* Please contact your Supermicro sales representative for additional details |
| Note |
† BIOS version 3.0 or above is required |
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC and non-ECC UDIMM
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| SAS |
- SAS2 from Broadcom 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
- Supports up to 16 devices as default, more HDD devices support is also available as an option
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Broadcom BCM 57810S Dual Port 10 Gigabit Ethernet Supports SFP+
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- Nuvoton WPMC450 with Integrated Graphics
|
| |
|
| AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
| SCU SATA |
- 4x SATA 2.0 ports (3Gbps)
|
| SAS |
|
| LAN |
- 2 SFP+ 10GbE LAN ports
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 2.0 ports total (2 rear + 2 via header + 1 Type A))
|
| Video |
|
| Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header
|
| TPM |
|
|
 |
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
- Unit Identification (UID) button
|
| LEDs |
- 2 Network Activity LEDs
- Fan Fail/System Over Heat LED
- HDD activity LED
- Power Status LED
- Unit Identification (UID) LED
|
| |
|
| PCI-Express |
-
- 1 PCI-E 3.0 (x48) for left hand side riser card support
- 1 PCI-E 3.0 (x16) for right hand side riser card support
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| |
|
| Hot-swap |
- 8 x 2.5" hot-swap SAS/SATA drive bay
|
| |
|
| DVD-ROM |
- 1 x slim DVD-ROM drive bay
|
| |
|
| 8-port 1U TQ (W/ AMI 9072) backplane, support up to 8x 2.5-inch SAS/SATA HDD/SSD |
| |
|
| Fans |
- 5 x 40x56mm counter-rotation PWM fans
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| 1U 700W hot swap redundant 50mm wide power supply |
| Total Output Power and Input |
- 700W: 100-140 V, 50-60 Hz
- 750W: 180-240 V, 60-50 Hz
|
| Dimensions (L x W x H) |
|
| Output Type |
|
| Power Efficiency |
|
| Certification |
 Gold Certified |
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature Range:
10°C - 35°C (50°F - 95°F)
- Non-operating Temperature Range:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity Range:
8% to 90% (non-condensing)
- Non-operating Relative Humidity Range:
5% to 95% (non-condensing)
|
|
