|
|
SYS-1028U-E1CR4+ |
- SuperServer 1028U-E1CR4+ (Black)
|
|
|
Super X10DRU-i+ |
|
|
CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
|
Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
- 2666/2400 ECC DDR4 NVDIMM
|
DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
- NVDIMM: 16GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Connectivity |
- 4x GbE ports via AOC-UR-i4G
- Intel® i350 Gigabit Ethernet Controller
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics |
|
|
|
SAS |
- 10x SAS3 ports support via expander and storage Add-on Cards
- One of the following storage Add-on cards required:
AOC-S3108L-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3 16 HDD)
AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)
AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)
AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
|
LAN |
- 4x RJ45 GbE LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 5x USB 3.0 ports
(2 rear, 2 front, 1 Type A)
|
Video |
|
Serial Port |
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
Software |
- SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SUM and SSM
- Optional IPMI 1.5 / 2.0
|
Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Weight |
- Net Weight: 26 lbs (11.8 kg)
- Gross Weight: 41 lbs (18.6 kg)
|
Available Color |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
|
|
PCI-Express |
-
- 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
- 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
|
|
Hot-swap |
- 10x 2.5" Hot-swap drives supported via expander
|
|
|
|
Fans |
- 5x heavy duty fans with optimal fan speed control
- 3x additional fans optional
|
Air Shroud |
|
|
|
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input |
- 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
+12V |
- Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB |
|
Certification |
Platinum Level
[ Test Report ] |
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN |
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features |
- 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|