|
|
 |
|
|
|
 |
| SYS-1028GQ-TXRT |
- SuperServer 1028GQ-TXRT (Black)
|
| |
|
Super X10DGQ |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| |
|
| GPU |
- 4 NVIDIA® Tesla® P100 SXM2
- NVIDIA® NVLINK™ up to 80GB/s
|
| |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 1TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
|
| |
|
| SATA |
|
| LAN |
- 2 RJ45 10GBase-TEthernet ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 2 USB 3.0 ports (2 via headers)
|
| Video |
|
| Serial Port |
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
- 35.2" (894mm)
- 39.3" (997mm) with rails
|
| Package |
- 24" (H) x 8" (W) x 46" (D)
|
| Weight |
- Net Weight: 45 lbs (15.9 kg)
- Gross Weight: 58 lbs (21.8 kg)
|
| Available Color |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
| |
|
| PCI-Express |
- 3 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 low-profile slot
|
| |
|
| Hot-swap |
- 2x 2.5" Hot-swap drive bays
|
| Fixed |
- 2x 2.5" internal drive bays
|
|
| |
|
| Fans |
- 7x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control
|
| |
| 2000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-120Vac / 12.5-9.5A / 50-60Hz
- 200-220Vac / 10-9.5A / 50-60Hz
- 220-230Vac / 10-9.8A / 50-60Hz
- 230-240Vac / 10-9.8A / 50-60Hz
- 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
|
| +12V |
- Max: 83.3A / Min: 0A (100-120Vac)
- Max: 150A / Min: 0A (200-220Vac)
- Max: 165A / Min: 0A (220-230Vac)
- Max: 166.7A / Min: 0A (230-240Vac)
- Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| CPU |
- Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- 5 Phase-switching voltage regulator
|
| FAN |
- Total of seven 4-pin PWM fans
- 7 fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8 Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 30°C (50°F to 86°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DGQ
CSE-118GQP-R2K05B |
1
1 |
Super X10DGQ Motherboard
CSE-118GQP-R2K05B Chassis |
| Add-on Card / Module |
AOM-PIO-I2XT-P |
1 |
AOM-PIO-I2XT |
| Backplane |
BPN-SAS3-118GQE |
1 |
2-port 1U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD |
| Cable 1 |
CBL-PWEX-0665 |
1 |
PCIe 8 pin female(black) to CPU 8 pin female(white), M60/M40 GPU power cable, 30cm, 18AWG, 10A/pin, 0~80C, RoHS/REACH |
| Cable 2 |
CBL-PWEX-0953 |
1 |
GPU,2x4F/RA/PCIe to 2x4F/CPU, P4.2, 42CM,17AWG, 8A/pin, -25~85C, RoHS/REACH |
| Cable 3 |
CBL-PWEX-0954 |
2 |
GPU,2x4F/RA/PCIe to 2x4F/RA/CPU, P4.2, 5.5CM,17AWG, 8A/pin, -25~85C, RoHS/REACH |
| Cable 4 |
CBL-SAST-0934 |
4 |
Oculink-Oculink 8 lanes Pascal Cable 50cm 34AWG |
| Cable 5 |
CBL-0484L |
4 |
SATA,INT,ROUND,ST-ST,55CM,30AWG |
| Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Manual |
MNL-1810-QRG |
1 |
SYS-1028GQ-TR(T) Quick Reference Guide,HF,RoHS/REACH |
| Riser Card |
RSC-G-68 |
1 |
RSC-G-68 |
| Riser Card |
RSC-G-66 |
1 |
1U GPU Riser Card with 2 PCI-E x16 slot |
| Heatsink / Retention |
SNK-P4000V |
4 |
1U Passive GPU Heat Sink for NVIDIA SXM2 Module in SYS-1028GQ-TXR(T) Series Servers |
| Heatsink / Retention |
SNK-P0057P |
2 |
1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Square ILM MB |
| Power Supply |
PWS-2K05A-1R |
2 |
1U 2000W Redundant Titanium Power Supply W/PMbus 73.5x40x265mm,RoHS/REACH |
| Fans |
FAN-0163L4 |
7 |
40x40x56 mm 23.3K-20.3K RPM Counter-rotating Fan |
| Rail Set |
MCP-290-11809-0N |
1 |
Rail set, Quick/Quick, Auto Latch, travel 535mm Short Version, Post to Post 685mm |
|
|
|
