 |
 |
MBD-X10SLM+-LN4F |
|
|
 |
Form Factor |
|
Dimensions |
- 9.6" x 9.6" (24.38cm x 24.38cm)
|
|
 |
CPU |
- Intel® 4th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series.
- Single Socket LGA 1150 supported
|
|
 |
Memory Capacity |
- Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots
|
Memory Type |
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
 |
Chipset |
|
SATA |
- SATA3 (6 Gbps) ports; RAID 0,1,5,10
- SATA2 (3 Gbps) ports; RAID 0,1
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Quad LAN with Intel® Ethernet Controller I210-ATSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output1 Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics |
|
|
 |
LAN |
- 4 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 6 USB 2.0 ports (2 rear + 4 headers),
- 4 USB 3.0 ports (2 rear + 1 header + 1 Type A) Type A
|
Video Output |
- 1 VGA D-Sub Connector port
|
Serial Port / Header |
- 2 COM Ports (1 rear, 1 header)
1 fast UART 16550 serial
|
TPM |
|
|
 |
 |
PCI-E |
- 1 PCI-E 3.0 x16
- 1 PCI-E 2.0 x2 (in x8 slot),
-
|
|
 |
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- ACPI 5.0
- USB Keyboard support
- DMI (SMBIOS) 2.7
|
|
 |
Software |
- IPMI2.0, NMI, SuperDoctor® III, Watchdog
|
Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
 |
Voltage |
- +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, VBAT
|
FAN |
- 5x 4-pin fan headers (up to 5 fans), Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control
|
Temperature |
- Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI, FC temperature sensing logic
|
LED |
- CPU / System Overheat LED, +5V Standby alert LED
|
Other Features |
- Chassis intrusion detection, Chassis intrusion header
|
|
 |
Operating Temperature Range |
- 0°C ~ 50°C (32°F ~ 122°F)
|
Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|