Podrobné informace
End of Life produkt, cena je pouze informativní, připravili jsme pro Vás tyto alternativy.
|
|
 |
Key Features
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 1TB† ECC 3DS LRDIMM , up to
DDR4- 2400†MHz ; 8x DIMM slots
3. 1x PCI-E 3.0 (x16) low-profile slot
4. Intel® i350 Dual port GbE LAN
5. 3x 3.5" Hot-swap SATA3
drive bays
6. 2x SATA DOM
7. 1600W Redundant Power Supplies
Titanium Level (96%)
|
|
| |
 |
|
|
|
|
|
 |
| SYS-6028TR-HTR |
- SuperServer 6028TR-HTR (Black)
|
| |
|
Super X10DRT-H |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| |
|
| |
|
| Memory Capacity |
- 8x 288-pin DDR4 DIMM slots
- Up to 1TB† ECC 3DS LRDIMM, 256GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
|
| |
|
| Serial ATA |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
|
| Video |
|
| Serial Port / Header |
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Package |
- 26.4" (H) x 11.2" (W) x 39.8" (D)
|
| Weight |
- Gross Weight: 85 lbs (38.6kg)
- Net Weight: 54.5 lbs (24.7 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
|
| PCI-Express |
- 1x PCI-E 3.0 (x16) Low-profile slot
- 1x PCI-E 3.0 (x8) connectors for SMCI Add-on Cards
|
| |
|
| Hot-swap |
- 3x 3.5" Hot-swap SATA3 HDD trays
|
| |
|
| Fans |
- 4x 8cm heavy duty PWM fans with optimal fan speed control
|
| |
| 1600W 1U Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-140Vac / 10-7A / 50-60Hz
- 180-240Vac / 11-8A / 50-60Hz
|
| +12V |
- Max: 67A / Min: 0A (100-140Vac)
- Max: 133A / Min: 0A (180-240Vac)
|
| +5Vsb |
|
| Output Type |
- 27 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DRT-H
CSE-827HQ-R1K68B |
4
1 |
Super X10DRT-H Motherboard
2U Chassis |
| Air Shroud |
MCP-310-82715-0B |
4 |
Plastic air shroud for SC827H/HQ,217HQ, X9 DP |
| Backplane |
BPN-SAS-827HQ |
1 |
12-port 2U Twin^2 (3 drives per node) midplane, support up to 12x 3.5-inch SAS/SATA HDD |
| Backplane |
BPN-ADPX9-6SATA |
4 |
6-PORT SATA ADAPTER FOR TWIN |
| Cable 1 |
CBL-0473L |
8 |
SATA,INT,ROUND,ST-ST,21CM,30AWG |
| Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Manual |
MNL-1644-QRG |
1 |
6028TR-HTR/HTFR, QRG |
| Riser Card |
RSC-R1UTP-E16R |
4 |
1U RHS TwinPro Riser card with one PCI-E x16 slot |
| Heatsink / Retention |
SNK-P0047PW |
4 |
1U Passive Custom Rear CPU Heat Sink for X9, X10 1U Twin, 2U Twin^2 8-DIMM per Node Series Servers |
| Heatsink / Retention |
SNK-P0047PS |
4 |
1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
| Power Supply |
PWS-1K68A-1R |
2 |
1U 1600W Redundant Titanium Power Supply 76mm width 27Pair,PBF |
|
|
|
